Cru RedPort SAS Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Accesorios De Computador Cru RedPort SAS. CRU RedPort SAS User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 2
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
A Brand of CRU-DataPort A Brand of CRU-DataPort
RedPort
TM
SAS 6G
Quick Start Guide
Forensic Device User Advisory
After installing the authorized software drivers on your computer, and installing the card itself, it’s a
good idea to verify the card’s write-blocking function before using it to access sensitive data. This
is easily done: attach a known good formatted drive or storage device, and verify that the volume
mounts properly on your computer. Copy files to the drive. Due to the “spoof writing” style of
write-blocking employed by this product, the files will appear to copy successfully. Next, unmount
and remount the drive. The files that you copied should not appear after the drive is remounted. If
they do appear, there is a problem with your forensic device, and you should contact our support
department for further instructions.
CRU-WiebeTech support may be reached at 866-744-8722 (toll free) or support@wiebetech.com (email).
WARNING: You must install correct drivers before you install the RedPort card. Failure
to do so may affect the write-blocking capabilities of the product.
1. Installing Drivers
Before installing the RedPort host adapter, you must configure your system to recognize and use it
by installing drivers for your operating system.
RedPort and WiebeTech are trademarks of CRU Acquisitions Group, LLC. Other marks are the property of their respective owners.
© 2008, 2011 CRU Acquisitions Group, LLC. All rights reserved
Limited Product Warranty
CRU-DataPort (CRU) warrants this product to be free of significant defects in material and workmanship for a period of two years from the original date of purchase.
CRU’s warranty is nontransferable and is limited to the original purchaser.
Limitation of Liability: The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties, including but not limited
to, the implied warranties of merchantability and fitness for a particular purpose and non-infringement of third-party rights with respect to the documentation and
hardware. No CRU dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. In no event will CRU or its suppliers be
liable for any costs of procurement of substitute products or services, lost profits, loss of information or data, computer malfunction, or any other special, indirect,
consequential, or incidental damages arising in any way out of the sale of, use of, or inability to use any CRU product or service, even if CRU has been advised of the
possibility of such damages. In no case shall CRU’s liability exceed the actual money paid for the products at issue. CRU reserves the right to make modifications and
additions to this product without notice or taking on additional liability.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a home or commercial environment. This equipment generates, uses, and can radi-
ate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
In the event that you experience Radio Frequency Interference, take the following steps to resolve the problem:
1) Ensure that the case of your attached drive is grounded.
2) Use a data cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
4) Reorient or relocate the receiving antenna.
A9-000-0017-1 Rev. 1
Product Name RedPort SAS/SATA 6G
Operating System • Windows 7, Vista, XP
• Linux Red Hat Enterprise 5
• Linux SUSE Enterprise 10/10.3
Connectors • 1 Mini SAS (x4) SFF-8088 External
• 1 Mini SAS (x4) SFF-8087 Internal
Ports 4 External/4 Internal
Bus Characteristics x8 PCIe 2.0
Data Rate Up to 6Gbps
Form Factor Low Profile
Dimensions 5.6” L x 2.73” H (142.24mm x 69.34mm)
Shipping Weight 1 pound
Compliance CE, FCC, RoHS
Support We don’t expect anything to go wrong with your product. But if it does, Tech Support is
standing by and ready to help. Contact us through wiebetech.com/techsupport. Phone
support also available at (866) 744-8722.
Please visit http://www.wiebetech.com/techsupport.php for more information and the full user manual for this product.
WiebeTech is a brand of CRU.
FOR OFFICE OR COMMERCIAL USE
Vista de pagina 0
1 2

Indice de contenidos

Pagina 1 - Quick Start Guide

A Brand of CRU-DataPort A Brand of CRU-DataPortRedPortTM SAS 6G Quick Start GuideForensic Device User AdvisoryAfter installing the authorized software

Pagina 2 - 2. Hardware Installation

A Brand of CRU-DataPort A Brand of CRU-DataPortl. Compile and install the driver using ./install.sh. The driver is now installed and ready to use. m

Comentarios a estos manuales

Sin comentarios